Hydraulic packers use fluid pressure to drive the cone behind the slips. Once set they remain set by the use of either entrapped pressure or a mechanical lock.
PFT-H1 is a high-pressure, double-grip,
retrievable packer that isolates the annulus from the production conduit. A straight tubing-string pull releases the packer
PFT-H2 Packer is a double-grip, retrievable packer. Multiple bores are available for the deployment of ESP cable, chemical-injection lines, control lines, and well-monitoring devices.
PFT-H3 Packer robustness of a permanent packer, while maintaining the flexibility of a retrievable packer. Retrieval performed by Cut-to-release method enables packer removal, saving time.
PFT-H4 are hydraulic/hydrostatic packers are hydraulically set, single-string packers using hydrostatic pressure. Setting and straight-pull release without tubing rotation.
PFT - H6 is designed for low to medium pressure applications. The short body length ideal for low-angle deviations and horizontal applications. Compact, economical packer.
These are used in applications where hydraulic packers are not suitable. They are set using mechanical forces, with or without rotations, by manipulating the tubing string.
Can be set in tension or compression. Simple 1/4 turn rotation to set and release with inbuilt bypass.
Packer is a compression set packer that allows tubing to be left in tension, compression or neutral condition.
Double Grip Packer is compression-set, retrievable. Used when differential pressure from below is anticipated.
Single Grip Packer is compression-set, retrievable. Used when minimal differential pressure from below is anticipated.
Tension-set, single-grip, retrievable production packers that isolate the annulus in low-pressure production work.
The SNAPSET Packer is run above
a retrievable or permanent sealbore packer to isolate a zone between them.
PFT-CUP packer isolates casing leaks, zones, and injection wells in shallow conditions cost effectively and efficiently. Usually installed in multiples of two, with the cups facing toward or away from the center,
A packer with the seal bore through the body of the packer. The sealbore packer is often set on wireline to enable accurate depth correlation.
Permanent Seal Bore Packer are versatile high-performance permanent packers designed for high pressure and hostile environment.
U-Permanent Seal Bore Packer features a large upper bore that permits completions with large-ID tubing in wells with high production rates.
Permanent Hydraulic-Set Seal bore Packer is a robust, high-performance, designed for high differential pressure in single or multiple zone applications.
U-Permanent Hydraulic-Set Seal bore Packer is designed for single- or multiple-zone completions in straight to highly deviated wellbores with high differential pressure.
Retrievable Seal bore packer is a reliable, high-pressure packer for production, gravel packing, and injection. It can be set on wireline or on tubing with a hydraulic setting tool.
U-Retrievable Seal bore packer has a large upper bore for the installation of large ID tubing for high-production flow rates. can be set on wireline or on tubing with a hydraulic setting tool.
Seal Bore Extensions, Mill Out Extensions, Locator Seal Assembly, Anchor Seal Assembly, Polished Bore Receptacle
Hydro Trip Sub is a pressure actuated device installed in tubing string below a hydraulic actuated tool such as Hydraulic packers.
The Pump Out Plug is used as a temporary plug to seal off pressure below the packer. The POP is removed by the application of pump pressure to the tubing string.
Tubing anchor catcher is run below a sucker-rod pump to anchor the lower end of the tubing string. String can be landed in tension, reducing the tubing twist.
Telescopic Swivel Sub enables easy makeup of the tubing string between multistring packers by rotation and telescoping.
Annulus Fluid Dump Valve provides communication between the tubing and annulus to drain the annulus before the string is pulled.
Expendable Seating Sub Assembly temporarily plugs tubing to deploy a hydraulically set packer or to facilitate stimulation, acidizing, and testing.
Expansion Joint, compensates for tubing movement resulting from temperature and pressure variations during production, shut-in, and stimulation in single- and dual-string completions.
Get in touch with our sales team for more details, now! - info@petroforgetech.com
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.
We do not store any user data.