Sliding Sleeve Doors
The Sliding Sleeve is completion device that can be operated to provide a flow path between the production conduit and the annulus.
Elastomeric Sliding Sleeve
PFT - NE Sliding Sleeve
PFT-NE (Non-Elastomeric) Sliding Sleeve installed in the production string provides a convenient way to establish or shut off communication between the tubing & annulus.
Landing Nipple
A completion component fabricated as a short section of heavy wall tubular with a machined internal surface that provides a seal area and a locking profile.
PFT - Profiles Nipples
X, XN, R & RN Nipple offers an expanded versatility to downhole selection. Any desired number of Nipples can be placed in the production string.
No-Go Selective Nipple
F & R No-Go Selective Landing Nipple provides for the location of various wireline flow control devices in the production string.
Lock Mandrel
Locking Mandrels are selective and Non-Selective set lock mandrels designed to be landed down hole.
PFT - Lock mandrels
Lock mandrels profiles runs respective to X, XN, R, RN Landing Nipple profile. The “CX” Lock is available with various sub surface plug assemblies and flow control accessories.
ON/OFF Tool
The On-Off Tool is a tubing seal receptacle allowing isolation of a lower zone using a wireline blanking plug.
PFT - 2 ON/OFF Tool
PFT-2 ON/OFF Tool include testing, treating, production, completion, and other remedial operations. It is used in operation that require tubing disconnect and re-engagement without disturbing the packer.
Shifting Tool
The Shifting tools are positioning tools, are downhole tools used in the oil and gas industries to shift and reposition flow control and circulation devices.
B shifting Tool
The B Shifting Tool is designed to selectively locate and shift most sliding sleeves. This tool is used to locate and either open or close a sliding sleeve.
Hydraulic Shifting Tool
Hydraulic Shifting Tool is used for opening or closing multiple sliding sleeves in a single coiled tubing trip with flow-activated shifting Tool.
D2 Shifting Tool
The D-2 shifting tool is used to provide a safe, selective and controlled method of opening and closing PFT-LU sliding sleeve.
Equalizing Prongs
The Equalizing prongs is used to plug off the wellbore and in conjunction with Lock mandrels.
PFT - Equalizing Prongs
Equalizing Progs is used in conjunction with Lock Mandrel to act as a plug to hold pressure from either above or below the well to perform replacement or repair work of surface equipment.
Pulling Tools
Pulling tools are used to retrieve temporary devices, such as flow-control equipment, from the wellbore.
PFT - Pulling Tools
The PFT-Pulling tools are specially designed for retrieval operations. Pulling tools are available in a range of sizes and profiles
Running Tools
Running tools are used to install flow-control equipment in the wellbore. It enables equipment to be set in a target location for well inspection, workover and intervention purposes.
PFT - Running Tools
The PFT-Running tool is used in placing the downhole tools at their respective positions deep inside the wellbore. Once this purpose is achieved, the running tools are retrieved back from the wellbore.
Blanking Plugs
Blanking plug is a device capable of holding pressure differentials from above or below when set at any depth.
PFT - Blanking Plugs
PFT - Blanking Plug are available in respective to X, XN, R, RN Landing Nipple profile. Our blanking plugs designed to hold large differential pressure.
Get in touch with our sales team for more details, now! - info@petroforgetech.com